【New】Truck Turntable
Features
• A temporary turntable for dump trucks and mixers to turn inside the tunnel
• Towable with heavy equipment to relocate it.
• Optional wheels will allow relocation over a long distance.
• Able to operate without leaving a vehicle
• Standardly equipped with two controllers to operate from either side of the turntable.
Specifications
| Product Code | T81 30063 001 | T81 30064 001 | T81 3006M 001 |
|---|---|---|---|
| Maximum Turning Load （kg） | 30,000 | 30,000 | 30,000 |
| Maximum Passing Load（kg） | 30,000 | 41,000 | 30,000 |
| RPM（min-1） | 0.7/0.85 | 0.7/0.85 | 0.8 |
| Controls | 3 Point Buttons | 3 Point Buttons | 4 Point Buttons |
| Drive | Rubber Crawler Friction Drive | Rubber Crawler Friction Drive | Urethane Crawler Friction Drive |
| Power | 200/220V 50/60Hz | 200/220V 50/60Hz | 200/220V 50/60Hz |
| Length（mm） | 12,320 | 14,330 | 12,240 |
| Width（mm） | 3,600 | 3,620 | 3,220 |
| Height（mm） | 659 | 892 | 544 |
| Unit Mass (kg) | 9,200 | 13,200 | 13,200 |
| Total Mass (with Slopes) | 13,300 | 18,900 | 21,600 |
Resources
| Product Code | T81 30063 001 | T81 30064 001 | T81 3006M 001 |
|---|---|---|---|
| Manual | Preparing… | Preparing… | Preparing… |
| Layout(PDF) | Preparing… | Preparing… | Preparing… |
| Layout(DXF) | Preparing… | Preparing… | Preparing… |
| Engineering Department Catalogue | Preparing… | Preparing… | Preparing… |
| Catalogue | Preparing… | Preparing… | Preparing… |
FAQ
FAQ are not registered at the moment.
Contact Us
AKTIO Corporation – Engineering Department: 
Address: Tokyo DL Center 4F, 3-6-41 Shinsuna, Koto-ku, Tokyo, 136-0075
