Battery Locomotive
Battery Locomotive
Requires special training for “Operation of a motor vehicle on a rail”
Handling Precautions for Battery Locomotive
1. Avoid installing a recharger where it is high-temperature, humid, or gassing with hazardous gases such as methane.
2. No flammables while charging, and keep well ventilated. Danger of explosion due to a production of oxygen and hydrogen gases. Cases of fire due to static electricity have been reported. Do not cause static electricity inside the battery case.
3. Do not unplug the battery plug while recharging. A spark may cause fire or explosion.
4. Replenish battery solution to optimal amount. Use distilled or purified water if solution is low. Do not use tap water, as it will lessen the battery’s life. Recharging a battery while low on solution will burn the battery due to an increase in the solution’s temperature and excessive generation of hydrogen gas. Also, recharging with too much distilled water will cause an increase in solution’s temperature and an overflow of diluted sulfuric acid, which will cause electricity leakage and casing corrosion. Repetition may cause an explosion from electricity leakage, or a corrosion hole at the bottom of the casing.
5. Do not over-discharge the battery. Running a motorcar until it stops will lessen the battery’s life. It may also trigger a safety device on a recharger due to voltage overload when it starts recharging.
6. Do not touch the battery terminals. Electrocution hazard.
Sales Items (Engine Battery Maintenance Purpose)
・Hydrometer
・Distilled Water
・Dropper
・Funnel
・Bottle
Specifications
■Rheostatic Control Engine
| Product Code | KX1 00610 001 | KX1 01010 001 | KX1 02010 001 | ||||
|---|---|---|---|---|---|---|---|
| Model | BML0.6H-508/610 | E-1-410 | E-1-450 | E-1-508 | E-1-610 | BL2-HN-508 | |
| Nominal Weight (t) | 0.6 | 1 | 1 | 1 | 1 | 2 | |
| Rated Traction (kgf) | 75 | 100 | 255 | ||||
| Rated Velocity (km/h) | 5.1 | 5.0 | 6.0 | ||||
| Motor Output (kW) | 1.6×1car | 0.75×2car | 2.0×2car | ||||
| Layout | Length (mm) | 1,250 | 1,845 | 1,645 | 1,845 | 1,645 | 2,340 |
| Width (mm) | 800 | 650 | 740 | 690 | |||
| Height (mm) | 870 | 1,000 | 935 | 1,025 | 950 | 970 | |
| Rail Gauge (mm) | 508/610 | 410 | 450 | 508 | 610 | 508 | |
| Wheel Base (mm) | 670 | 770 | |||||
| Wheel Diameter (mm) | 250 | 200 | 406 | ||||
| Product Code | KX1 03010 001 | KX1 04000 001 | KX1 06000 001 | KX1 08000 001 | KX1 12010 001 | |
|---|---|---|---|---|---|---|
| Model | BL3-FS-610 | BL4-HTB-762 | BL6-MNTB-610/762 | BL8-MTB-762/914 | BL12-MTBRC-762/914 | |
| Nominal Weight (t) | 3 | 4 | 6 | 8 | 12 | |
| Rated Traction (kgf) | 400 | 630 | 1,100 | 1,300 | 2,300 | |
| Rated Velocity (km/h) | 6.0 | 7.5 | 8.0 | 8.5 | ||
| Motor Output (kW) | 6.0×1car | 5.5×2car | 12.0×2car | 15.0×2car | 28.5×2car | |
| Layout | Length (mm) | 1,740 | 3,110 | 3,680 | 3,874 | 4,800 |
| Width (mm) | 870 | 1,120 | 1,150 | 1,410 | 1,430 | |
| Height (mm) | 1,050 | 1,190 | 1,250 | 1,750 | 1,940 | |
| Rail Gauge (mm) | 610 | 762 | 610/762 | 762/914 | 762/914 | |
| Wheel Base (mm) | 710 | 1,000 | 1,600 | 1,800 | 2,000 | |
| Wheel Diameter (mm) | 406 | 508 | 560 | 610 | 660 | |
■Servo Engine
| Product Code | KX1 02020 001 | KX1 03020 001 | KX1 06020 001 | KX1 08030 001 | ||
|---|---|---|---|---|---|---|
| Model | BL2-HDS-610 | BL3-HDS-508/610 | BL6-HDS-610/762 | BL8-M-SV-762 | BL8-M-SV-762/914 | |
| Model Type | DC Servo Type | AC Servo Type | ||||
| Nominal Weight (t) | 2 | 3 | 6 | 8 | 8 | |
| Rated Traction (kgf) | 255 | 500 | 1,190 | 1,800 | ||
| Rated Velocity (km/h) | 6.0 | 8.0 | ||||
| Motor Output (kW) | 2.0×2car | 4.0×2car | 14.0×2car | 22.0×2car | ||
| Layout | Length (mm) | 2,280 | 2,695 | 3,176 | 4,110 | |
| Width (mm) | 760 | 710/765 | 780/932 | 1,250 | 1,410 | |
| Height (mm) | 1,020 | 1,000 | 1,300 | 1,840 | 1,915 | |
| Rail Gauge (mm) | 610 | 508/610 | 610/762 | 762 | 762/914 | |
| Wheel Base (mm) | 850 | 960 | 1,050 | 1,850 | ||
| Wheel Diameter (mm) | 406 | 500 | 610 | |||
| Product Code | KX1 12030 001 | KX1 15020 001 | KX1 15030 001 | |
|---|---|---|---|---|
| Model | BL12-M-SV-762/914 | BL15-MDS-762/914 | BL15-M-SV-762/914 | |
| Model Type | AC Servo Type | DC Servo Type | AC Servo Type | |
| Nominal Weight (t) | 12 | 15 | ||
| Rated Traction (kgf) | 2,300 | 2,700 | ||
| Rated Velocity (km/h) | 8.5 | 8 | ||
| Motor Output (kW) | 30.0×2car | 28.5×2 | 45.0×2car | |
| Layout | Length (mm) | 4,800 | 4,600 | 4,900 |
| Width (mm) | 1,430 | |||
| Height (mm) | 1,915 | 1,850 | 1,915 | |
| Rail Gauge (mm) | 762/914 | |||
| Wheel Base (mm) | 2,000 | |||
| Wheel Diameter (mm) | 660 | |||
■Steep Slope Engine
| Product Code | KX2 04030 001 | KX2 05030 001 | KX2 120S0 001 | |
|---|---|---|---|---|
| Model | RBL4-HSV-610 | RBL5-HSV-610 | RBL12-H-SV-762 | |
| Nominal Weight (t) | 4 | 5 | 12 | |
| Rated Traction (kgf) | 550/1,700（Rack Rail） | 1,250/2,670（Rack Rail） | 1,450/4,970（Rack Rail） | |
| Rated Velocity (km/h) | 6.0/2.0（Rack Rail） | 7.2/3.0（Rack Rail） | 8.0/3.0（Rack Rail） | |
| Motor Output (kW) | 14×2car | 14×3car | 22×4car | |
| Layout | Length (mm) | 3,150 | 3,415 | 4,800 |
| Width (mm) | 940 | 990 | 1,240 | |
| Height (mm) | 1,550 | 1,586 | 1,820 | |
| Rail Gauge (mm) | 610 | 610 | 762 | |
| Wheel Base (mm) | 1,450 | 1,710 | 2,400 | |
| Wheel Diameter (mm) | 420 | 508 | 660 | |
■Chopper Engine
| Product Code | KX1 02040 001 | KX1 03040 001 | KX1 04040 001 | |||
|---|---|---|---|---|---|---|
| Model | BL2-HTC-508 | BL2-HTC-610 | BL3-HTC-610 | BL4-HTC-610 | BL4-HTC-762 | |
| Nominal Weight (t) | 2 | 2 | 3 | 4 | 4 | |
| Rated Traction (kgf) | 255 | 460 | 630 | |||
| Rated Velocity (km/h) | 6 | |||||
| Motor Output (kW) | 2.0×2car | 4.0×2car | 5.5×2car | |||
| Layout | Length (mm) | 2,340 | 2,280 | 2,590 | 3,150 | |
| Width (mm) | 710 | 760 | 816 | 968 | ||
| Height (mm) | 1,070 | 1,020 | 1,180 | 1,210 | ||
| Rail Gauge (mm) | 508 | 610 | 762 | |||
| Wheel Base (mm) | 850 | 950 | 1,050 | |||
| Wheel Diameter (mm) | 406 | 508 | ||||
*When there is a specification for the rheostatic and servo engines, the left is for thinner models, and the right is for wider models
FAQ
Contact Us
AKTIO Corporation – Engineering Department: 
Address: Tokyo DL Center 4F, 3-6-41 Shinsuna, Koto-ku, Tokyo, 136-0075
